2 of 7 (Watch) Clean A Reverse Osmosis (RO) & Ice Line That Is Connected

This second part of the seven part series sanitizes the filter housings, the drain tube, the faucet tube and the faucet.  This is the first section of the RO filter system that will be sanitized.  The second section to be sanitized will be the storage tank.  The third section to be sanitized will be the ice line.

To sanitize this first section the bleach will be allowed to soak inside the filter housings, the drain tube, the faucet tube and the faucet for 10 minutes.

     RO filter disinfection instructions:

1. Replace the cap on the RO membrane housing and reconnect the tubes.
2. Open the filter housings and remove and discard the filters.
3. Pour 2 tablespoons of bleach into each of the filter housings.
4. Screw the filter housing back on the filter housing caps.
5. Turn off the storage tank ball valve.
6. Turn on RO faucet.
7. Turn on feed water supply valve until water flows out of the RO faucet, then turn off the RO faucet.
8. Turn off the feed water supply valve.
9. Allow bleach to disinfect for 10 minutes.

Visit WaterProBill's Store.  
Visit us at Water Pro for more information.